Old Project Avalon Forum (ARCHIVE) - View Single Post

GregorArturo · 11-14-2008, 07:14 PM

So I've been working on this idea in how to make this device as efficiently as possible.

First thing one should consider is the notion of revolution/rotation/spin, specifically within that of the microcosm and macrocosm of a system. Here is the most universal example in understanding this concept, as Nassim relates with his work. The Earth rotates upon its axis, while it revolves around the sun. The sun then rotates upon its axis, while it revolves around the galactic center. On the other end of the spectrum referred to as usually the microcosmic aspect of the system can be seen with the spin of an atom and the electrons orbiting it.

However, with implementing this all into a system one has to take into effect the Coriolis effect which is to me the greatest factor [or hole] in overcoming the torsion field theory, just as with Einstein's theory of relativity and spin-angular momentum. This has probably already been devised and solved for, I just have not come to conceptualize it myself or read any research on the matter.

The Coriolis Effect Visualized

So, the largest understanding in making this system, does one use a solitary rotation around a single axis, or revolve it around a single axis (like an orbit). The latter is how the experiment was carried out the David Wilcock described in the very last section of his book "Divine Cosmos" involving two pyramids rotating in around an axis moving through alternating magnetic fields (two sets of 16 magnets above and below the rotation) while being exposed to positive or negative ions.

Ideally, one would think that they should include both in the system. The notion I am interested in, specifically mathematically, how torsion fields are affected/created/distorted moving away from the axis, as in the force that is generated exponential, or linearly decreasing... I am assuming in terms of fractal theory when you implementing a double rotation system (as seen within our solar system) it causes a multiplier effect.

On a important note, from my reading into actual scientific understanding of torsion field theory, left hand spin increases torsion fields, while right hand spin reduces or more accurate shields against torsion fields. Now, I just spent some time researching more in depth into this universal example I used with the 'cosms' of revolution. All the planets in our solar system [except for Venus, which is very slow in the other direction and may be the reason why life there had to leave it] rotate counter-clockwise, and then orbit the sun counter-clockwise. Technically, our galaxy orbits counter-clockwise, but the notion of direction of spin relates directly to one's perspective. If we considered the south pole to be north, or say the top of the world, it would be the opposite or clockwise (right-hand spin).

However, this is where the unified idea of the basis to our reality might come into effect. The universe is isotropic in that there is a balanced amount of galaxies in the universe (50-50) that spin either clockwise or counter-clockwise. It is our system of revolution that dictates these laws of physics. Left hand spin of an object encourages cellular growth or increase cellular growth as you are moving in unison with the system, increasing energy, while right hand spin you are moving against it, decreasing energy in the system. This could might be more easily 'visualized' if this spin and its factor of energy be related to inertia. We exist in this reality by the property of inertial energy. Without this energy, one could say we cease to exist. Accelerating spin or increasing the energy would lead to higher levels of existence such as 4th density or within the thresholds of the speed of light.

This also relates to my theory of cubic and hexagonal/triangular structures (which I have seen generalized but not directly established), in which the former decreases/shields torsion fields, and the latter increases/propagates torsion fields. For the orgonite lovers out there, all metals are cubic crystal lattice structures, while organic substances are carbon based which are hexagonal crystal lattice structures.

Now with these ideas established, let's apply this to a system, the good stuff.

First, we would use a hollow pyramid, the materials it is made out of I am not sure, but most likely organic. I was thinking a limestone pyramid might even be very efficient. A good design would evolve a hollowed out empty pyramid inside essentially, reflecting the materialistic entity on the outer wall, and the aether (technically air) on the inside where one would place say a plant. For this experiment, agar with bacteria would most likely work great if one sets aside the notion that torsion can apply sustenance, which is another theory that needs to be scientifically proven [but at the moment assumed for good reason]. You could do this by having the base of the pyramid being removable, or in essence, is a the very base level of the pyramid, with like proportion of the top cut off, relates to the reciprocal proportion being the thickness of the outer pyramid walls. Think of the movie Star Gate where you have the ship land on top of the pyramid, now that internal stone pyramid, you cut off the top, leaving a vacant spot inside. I plan on making diagrams for this to help people better understand.

In terms of material, I also read recently that aluminum specifically shields torsion fields, which relates to the notion of how aluminum and copper are the only metals [supposedly] in the presence of each other [and this doesn't seem be a definite but they needed to be separated by a dielectric, like PVC or rubber] that generate torsion fields.

Next, would involve placing a large Rodin coil over the pyramid so it rests and wedges itself against it basically. Ideally, you want the Rodin coil to be perfectly balanced height wise with the pyramid, however, that is a theoretical notion and not necessarily true. The coil would NOT be connected to an external source, it that its soul purpose is generate a large magnetic field via the principal of an electric generator, however, the logistics of this I am not positive on (due to alternating magnetic fields) but would again assume (generation of electrical field explained later on).

One could connect [or maybe just be in the presence of] the coil to say a quartz crystal or fluorite (which the latter generates UV light I am pretty sure which would be beneficial to accelerated plant growth) based on it's various piezo properties. You would not want to use a light bulb as I can absolutely it would blow out in seconds due to overheating/too much current. This also brings up the notion of heat in the system, along with in the Rodin coil. I have a feeling that we do not fully understand thermodynamics and temperature. What I believe when it comes to this subject, heating is based on adding energy into a system, usually directly related to the spin or vibration of a particle or molecule. It is also attributed to the motion and collision of particles, specifically when in liquid and gaseous states of matter. So, in increasing all this energy in the system (as from what I know, basic torsion detectors focus on heat in organic substances such as the tension within nylon string), does this cause say the object in the pyramid to heat up, and maybe even burn? I have a feeling it does not. Does a psychic who uses a tremendous amount of energy necessarily burn themselves (makes you think of the phenomenon of human combustion)? I think there is much more to it, as we all do. Our understanding of physics is just touching the tip of the ice berg as we probably all agree unanimously.

Next would involve, either one or two sets of magneto wheels (the kind Ed used at Coral Castle which directly came from the Fort Model T and patented by John Keely in 1897, old but damn efficient in my opinion). I am leaning toward a set of two of them.

Now here is where we can drastically vary in design. Initially, I considered placing the pyramid with the coil in the center of the magneto wheels with one directly above and below the pyramid, and each aligned so that the north and south magnetic polarities line up between the wheels (so the wheels are shifted, instead of being mirror images of each other where the magnetic polarities line up in parallel unison which would mean north and north polarities were matching). The pyramid would the rotate around its center axis with the Rodin coil revolving with it. The coil moving through the magnetic field would [theoretically] generate a large electrical field in the coil along with a magnetic field.

The other concept involves having the pyramid with the coil rotate around a center axis counter-clockwise (orbit, not localized rotation) and most likely with another pyramid opposite to it (need balance and twice the work!). Ideally, these pyramids would also be [locally] rotating on their own axis counter-clockwise. The circular path of the pyramids would follow the actual location of the magnets (the outer band of the magneto wheel). This setup would be much much larger than the former. One thing to also note, the distortion of air [jets/steams] upon geometry [such as with the pyramid rotating on its axis, as its not a cone, it will have continuous pockets of air/space and then material [such as limestone] alternating in a perfect balanced manner] will also increase torsion fields as I found noted in some of the Russian research.

The last thing that I feel is important is the exclusion of external fields, even though they will increase the EM concentration, you want the frequencies to be in perfect balance and harmony, in essence, everything needs to propagate with perfect geometrical symmetry. This can be done by placing the device inside a Faraday cage as you are probably all familiar with. Also, I would recommend the electric motor that one would assume to spin the device be mechanical inside the system not to introduce other electrical fields even if they are balanced. I would feel most comfortable with the notion of just the Rodin coil and the magnetos for that effect. When I imply mechanical, I mean with the use of gears and belts, in which outside the system (Faraday cage) that it can be driven by an electric motor, or heck maybe in my bicycle (or directly by wind or water without the need of electric conversion) which can all then be geared (transmission system).

There are many other ways to vary this system obviously as this is just ideas I am throwing out based mainly on theoretical concepts and mathematical practicality. And as I always say, think about this one

Namaste.

11-14-2008, 07:14 PM	#88
GregorArturo Avalon Senior Member Join Date: Sep 2008 Location: Southern Maine Posts: 560	Torsion Generating Device So I've been working on this idea in how to make this device as efficiently as possible. First thing one should consider is the notion of revolution/rotation/spin, specifically within that of the microcosm and macrocosm of a system. Here is the most universal example in understanding this concept, as Nassim relates with his work. The Earth rotates upon its axis, while it revolves around the sun. The sun then rotates upon its axis, while it revolves around the galactic center. On the other end of the spectrum referred to as usually the microcosmic aspect of the system can be seen with the spin of an atom and the electrons orbiting it. However, with implementing this all into a system one has to take into effect the Coriolis effect which is to me the greatest factor [or hole] in overcoming the torsion field theory, just as with Einstein's theory of relativity and spin-angular momentum. This has probably already been devised and solved for, I just have not come to conceptualize it myself or read any research on the matter. The Coriolis Effect Visualized So, the largest understanding in making this system, does one use a solitary rotation around a single axis, or revolve it around a single axis (like an orbit). The latter is how the experiment was carried out the David Wilcock described in the very last section of his book "Divine Cosmos" involving two pyramids rotating in around an axis moving through alternating magnetic fields (two sets of 16 magnets above and below the rotation) while being exposed to positive or negative ions. Ideally, one would think that they should include both in the system. The notion I am interested in, specifically mathematically, how torsion fields are affected/created/distorted moving away from the axis, as in the force that is generated exponential, or linearly decreasing... I am assuming in terms of fractal theory when you implementing a double rotation system (as seen within our solar system) it causes a multiplier effect. On a important note, from my reading into actual scientific understanding of torsion field theory, left hand spin increases torsion fields, while right hand spin reduces or more accurate shields against torsion fields. Now, I just spent some time researching more in depth into this universal example I used with the 'cosms' of revolution. All the planets in our solar system [except for Venus, which is very slow in the other direction and may be the reason why life there had to leave it] rotate counter-clockwise, and then orbit the sun counter-clockwise. Technically, our galaxy orbits counter-clockwise, but the notion of direction of spin relates directly to one's perspective. If we considered the south pole to be north, or say the top of the world, it would be the opposite or clockwise (right-hand spin). However, this is where the unified idea of the basis to our reality might come into effect. The universe is isotropic in that there is a balanced amount of galaxies in the universe (50-50) that spin either clockwise or counter-clockwise. It is our system of revolution that dictates these laws of physics. Left hand spin of an object encourages cellular growth or increase cellular growth as you are moving in unison with the system, increasing energy, while right hand spin you are moving against it, decreasing energy in the system. This could might be more easily 'visualized' if this spin and its factor of energy be related to inertia. We exist in this reality by the property of inertial energy. Without this energy, one could say we cease to exist. Accelerating spin or increasing the energy would lead to higher levels of existence such as 4th density or within the thresholds of the speed of light. This also relates to my theory of cubic and hexagonal/triangular structures (which I have seen generalized but not directly established), in which the former decreases/shields torsion fields, and the latter increases/propagates torsion fields. For the orgonite lovers out there, all metals are cubic crystal lattice structures, while organic substances are carbon based which are hexagonal crystal lattice structures. Now with these ideas established, let's apply this to a system, the good stuff. First, we would use a hollow pyramid, the materials it is made out of I am not sure, but most likely organic. I was thinking a limestone pyramid might even be very efficient. A good design would evolve a hollowed out empty pyramid inside essentially, reflecting the materialistic entity on the outer wall, and the aether (technically air) on the inside where one would place say a plant. For this experiment, agar with bacteria would most likely work great if one sets aside the notion that torsion can apply sustenance, which is another theory that needs to be scientifically proven [but at the moment assumed for good reason]. You could do this by having the base of the pyramid being removable, or in essence, is a the very base level of the pyramid, with like proportion of the top cut off, relates to the reciprocal proportion being the thickness of the outer pyramid walls. Think of the movie Star Gate where you have the ship land on top of the pyramid, now that internal stone pyramid, you cut off the top, leaving a vacant spot inside. I plan on making diagrams for this to help people better understand. In terms of material, I also read recently that aluminum specifically shields torsion fields, which relates to the notion of how aluminum and copper are the only metals [supposedly] in the presence of each other [and this doesn't seem be a definite but they needed to be separated by a dielectric, like PVC or rubber] that generate torsion fields. Next, would involve placing a large Rodin coil over the pyramid so it rests and wedges itself against it basically. Ideally, you want the Rodin coil to be perfectly balanced height wise with the pyramid, however, that is a theoretical notion and not necessarily true. The coil would NOT be connected to an external source, it that its soul purpose is generate a large magnetic field via the principal of an electric generator, however, the logistics of this I am not positive on (due to alternating magnetic fields) but would again assume (generation of electrical field explained later on). One could connect [or maybe just be in the presence of] the coil to say a quartz crystal or fluorite (which the latter generates UV light I am pretty sure which would be beneficial to accelerated plant growth) based on it's various piezo properties. You would not want to use a light bulb as I can absolutely it would blow out in seconds due to overheating/too much current. This also brings up the notion of heat in the system, along with in the Rodin coil. I have a feeling that we do not fully understand thermodynamics and temperature. What I believe when it comes to this subject, heating is based on adding energy into a system, usually directly related to the spin or vibration of a particle or molecule. It is also attributed to the motion and collision of particles, specifically when in liquid and gaseous states of matter. So, in increasing all this energy in the system (as from what I know, basic torsion detectors focus on heat in organic substances such as the tension within nylon string), does this cause say the object in the pyramid to heat up, and maybe even burn? I have a feeling it does not. Does a psychic who uses a tremendous amount of energy necessarily burn themselves (makes you think of the phenomenon of human combustion)? I think there is much more to it, as we all do. Our understanding of physics is just touching the tip of the ice berg as we probably all agree unanimously. Next would involve, either one or two sets of magneto wheels (the kind Ed used at Coral Castle which directly came from the Fort Model T and patented by John Keely in 1897, old but damn efficient in my opinion). I am leaning toward a set of two of them. Now here is where we can drastically vary in design. Initially, I considered placing the pyramid with the coil in the center of the magneto wheels with one directly above and below the pyramid, and each aligned so that the north and south magnetic polarities line up between the wheels (so the wheels are shifted, instead of being mirror images of each other where the magnetic polarities line up in parallel unison which would mean north and north polarities were matching). The pyramid would the rotate around its center axis with the Rodin coil revolving with it. The coil moving through the magnetic field would [theoretically] generate a large electrical field in the coil along with a magnetic field. The other concept involves having the pyramid with the coil rotate around a center axis counter-clockwise (orbit, not localized rotation) and most likely with another pyramid opposite to it (need balance and twice the work!). Ideally, these pyramids would also be [locally] rotating on their own axis counter-clockwise. The circular path of the pyramids would follow the actual location of the magnets (the outer band of the magneto wheel). This setup would be much much larger than the former. One thing to also note, the distortion of air [jets/steams] upon geometry [such as with the pyramid rotating on its axis, as its not a cone, it will have continuous pockets of air/space and then material [such as limestone] alternating in a perfect balanced manner] will also increase torsion fields as I found noted in some of the Russian research. The last thing that I feel is important is the exclusion of external fields, even though they will increase the EM concentration, you want the frequencies to be in perfect balance and harmony, in essence, everything needs to propagate with perfect geometrical symmetry. This can be done by placing the device inside a Faraday cage as you are probably all familiar with. Also, I would recommend the electric motor that one would assume to spin the device be mechanical inside the system not to introduce other electrical fields even if they are balanced. I would feel most comfortable with the notion of just the Rodin coil and the magnetos for that effect. When I imply mechanical, I mean with the use of gears and belts, in which outside the system (Faraday cage) that it can be driven by an electric motor, or heck maybe in my bicycle (or directly by wind or water without the need of electric conversion) which can all then be geared (transmission system). There are many other ways to vary this system obviously as this is just ideas I am throwing out based mainly on theoretical concepts and mathematical practicality. And as I always say, think about this one Namaste.